A4 Sedan V6-3.2L (BKH) (2007)
/Page-1744001.png)
Differential Output Shaft: Specifications
Fastener Tightening Specifications
‹› 1 Always replace
Front Final Drive Bolt Tightening Sequence and Specifications
-
Tighten the bolts for the front final drive cover in 2 stages in sequence shown- 1 to 11 -, always replace the bolts:
‹› Tighten the bolts in sequence hand tight.
‹› Tighten the bolts in sequence to 25 Nm.
