A4 Sedan V6-3.2L (BKH) (2007)
-
Insert alternately and with same alignment each lining disc - 2 - (7 pieces) and outer disc - 3 - (6 pieces, 1.9 mm thickness).
Lining disc alignment:
‹› The illustration shows the lining discs with the old boot.
CAUTION!
‹› The lining discs must be installed with the same alignment, that is the places without outside teeth - arrows - must always lie one on top
of the other. Only in this way is the adjustment correct; mark the input shaft cylinder for correct installation, if necessary.