A4 Sedan V6-3.2L (BKH) (2007)
/Page-1771007.png)
CAUTION!
‹› The inner running and sealing surfaces - arrow A - of the thrust plate and pistons - arrow C - must not touch shaft during removal and
installation.
‹› The running and contact surfaces must not show the smallest signs of damage such as scratches or grooves as a result of removing or
installing.
‹› If damaged, the thrust plate or pistons must be replaced.
-
Carefully guide pressure plate - 1 - with pistons - 2 - down over shaft - 3 -.
‹› Inner running surfaces of thrust plate - 1 - and pistons - 2 - must not touch shaft.
-
Press thrust plate with pistons uniformly into input shaft up to stop.
Checking air play with feeler gauge ( T40102)