Audi Workshop Service and Repair Manuals

-

Install input shaft seal - A - => [ Input Shaft Seal ] See: Continuously Variable Transmission/Transaxle/Seals and Gaskets/Service and
Repair/Overhaul. 

-

Fill with ATF => [ ATF, Filling for ATF Flush ] See: Continuously Variable Transmission/Transaxle/Fluid - CVT/Service and Repair/01J,0AN
Transmission/ATF, Filling for ATF Flush.

CAUTION!
‹› The multitronic 01J transmission requires a different ATF than fixed-ratio automatic transmissions do. Only the ATF available as a

replacement part for the CVT transmission may be used in the planetary transmission. ATF specifications => Continuously Variable
Transmission See: 

‹› Flush ATF after installing transmission => [ ATF Flush ] See: Continuously Variable Transmission/Transaxle/Fluid - CVT/Service

and Repair/01J,0AN Transmission/ATF Flush.