A4 Sedan V6-3.2L (BKH) (2007)
/Page-1774009.png)
-
Install input shaft seal - A -. Refer to => [ Input Shaft Seal ] See: Continuously Variable Transmission/Transaxle/Seals and Gaskets/Service and
Repair/Removal and Replacement/01J Transmission/Input Shaft Seal.
-
Fill with ATF. Refer to => [ ATF Filling for Flushing Process ] See: Continuously Variable Transmission/Transaxle/Fluid - CVT/Service and
Repair/01J Transmission/ATF Flushing.
CAUTION!
‹› The Multitronic 01J transmission requires a different ATF than shift automatics. Only ATF for CVT transmission which can be
obtained as replacement part must be used in planetary gearing.
‹› Flush ATF after installing transmission. Refer to => [ ATF Flushing ] See: Continuously Variable Transmission/Transaxle/Fluid -
CVT/Service and Repair/01J Transmission/ATF Flushing.