A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-1791003.png)
-
Position lever on metal screw.
CAUTION!
Lay an appropriate wood or plastic plate - 2 - between lever and transmission housing to prevent damage.
‹› The housing must not be damaged.
-
Remove shaft seal.
Installing
-
Check differential shaft for wear => [ Differential Shaft, Checking for Wear ] See: Front Final Drive, Automatic Transaxle/Service and
Repair/Procedures/Final Drive, Differential (01J,0AN Continuously Variable Transmission)/Differential Shaft, Checking for Wear.
-
Clean breather tube - arrow - using pressurized air and lay a cloth on interior side of breather tube.
-
Clean differential shaft sealing surface - arrow - with cleaning solution (D 009 401 04) and a soft cloth; turn differential shaft to do so.