A4 Sedan V6-3.2L (BKH) (2007)
Identification: retaining tabs around plastic ring - arrows -.
‹› The release bearing must be replaced if plastic ring - 1 - has come loose.
‹› The release bearing - 3 - must be replaced if groove - arrow 2 - worn on the plastic ring - 1 - is deeper than 0.8 mm.
Pulling oil seal out of guide sleeve
A Counter-support, e.g. (Kukko 22/1)
B Internal puller 23.5 to 30 mm, e.g. (Kukko 21/4)
Pressing oil seal into guide sleeve (press in onto stop)