A4 Sedan V6-3.2L (BKH) (2007)
Pilot Bearing: Service and Repair
Needle Bearing on Dual Mass Flywheel
Needle Bearing on Dual Mass Flywheel
Special tools, testers and auxiliary items required
‹› Centering mandrel (3176)
‹› Bearing driver (3264)
‹› Depth gauge (VAS 6082)
‹› 1 - Internal puller (Kukko 21/2)
‹› 4 - Counter-support (Kukko 22/1)
Procedure
‹› Transmission removed.
-
Remove clutch pressure plate.
-
Measure depth - dimension x - that the needle bearing is driven into the dual-mass flywheel and note this for later re-installation.
-
Pull out needle bearing using internal puller ( Kukko 21/2) and counter-support (Kukko 22/1).
‹› The plastic ring in the dual-mass flywheel is affected by impacts. If plastic ring is damaged, the dual-mass flywheel must be replaced.