A4 Sedan V6-3.2L (BKH) (2007)
/Page-1877002.png)
-
Remove ATF check plug - B -.
-
Thread connection on shut-off valve of ATF filler system F/CVT gearbox VAS 5162 into opening of ATF check plug - B -.
-
Rotate shut-off valve in direction of filler hose - lower arrow -. ATF flows into transmission.
-
Fill transmission with 5 Liter ATF.
-
Selector lever in "P", start engine and let it run at idle.
CAUTION!
Let engine run at high speed at "2500 - -3000 RPM" for approx. 4 to 5 seconds immediately after starting.
Running the engine at high speeds is necessary so that the ATF pump is bled after a transmission repair.
If running at high speeds is not performed, the transmission can be damaged.
-
Start engine
-
By pressing the gas pedal, run engine at high speed at "2500 - -3000 RPM" for approx. 5 seconds.
-
Press brake pedal and hold.
-
Shift through all selector lever positions "P, R, N, D, S" and let each position remain shifted at idle for approx. 2 seconds.
-
Selector lever in "P" and let engine continue to run at idle.