A4 Sedan V6-3.2L (BKH) (2007)
/Page-1879001.png)
Fluid - CVT: Service and Repair
ATF, Changing or Filling After Repairs
ATF, changing or filling after repairs - 01J, Continuously Variable Transmission (CVT)
Special tools, testers and auxiliary items required
^
Triple square socket driver 3357
^
ATF filler system F/CVT transmission VAS 5162
^
Old oil collecting and extracting device V.A.G 1782
^
Safety glasses
Work procedure
^
Move vehicle onto a lifting platform or over a work pit so that it stands absolutely horizontal.
CAUTION!
Do not allow engine to run without filling ATF and do not tow the vehicle.
Note:
^
Refer to Rules of cleanliness for working on automatic transmissions.
^
Refer to General repair notes.
^
Observe disposal regulations!
^
Always blow compressed air through ATF cooler and ATF lines (max. 10 mbar) and replace auxiliary ATF filter before installing a
replacement transmission.
-
Fill ATF filler system F/CVT transmission VAS 5162 with ATF for CVT transmissions.
CAUTION!
The ATF filler tool must be clean and the ATF must not be mixed with any other ATF oils!