A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-1938001.png)
Seals and Gaskets: Removal and Replacement
Right Flange Shaft Sealing Ring and Grooved Ball Bearing
Right Flange Shaft Sealing Ring and Grooved Ball Bearing
Special tools, testers and auxiliary items required
‹› Pressure plate (VW 401)
‹› Pressure plate (VW 402)
‹› Punch (VW 407)
‹› Punch (VW 412)
‹› Extractor lever (VW 681)
‹› Driving sleeve (32-109)
‹› Tube (2040)
‹› Driver (2062)
Work procedure
-
Remove right flange shaft. Refer to => [ Right Flange Shaft ] See: Automatic Transmission/Transaxle/Front Final Drive, Automatic
Transaxle/Differential Output Shaft/Service and Repair/Right Flange Shaft.
Removing
Seal
-
Remove securing ring - arrow A - for grooved ball bearing.
-
Press flange shaft out of mounting bracket for flange shaft as shown in the illustration.