A4 Sedan V6-3.2L (BKH) (2007)
-
Place triple roller star on shaft according to marking and drive on until impact.
-
Insert securing ring, be sure to fit properly.
-
Press 70 grams of Grease (G 000 605 ) from repair kit into triple roller joint.
-
Slide joint over the rollers.
‹› Make sure CV boot does not get twisted during this.
-
Press 70 grams of Grease (G 000 605 ) from repair kit into rear side of triple roller joint.
-
Thoroughly clean groove - 4 - for sealing ring.
-
Insert O-ring - 3 - in groove - 4 -.
The individual parts are shown disassembled for the sake of a better illustration.
1
Securing ring
2
Cover from repair kit