A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-2045002.png)
-
Remove circlip from triple roller joint/drive axle.
1 - Circlip pliers (normal commercial type)
-
If boot is damaged, remove it using scissors or similar. Otherwise carefully push it back.
-
Insert drive axle in press.
-
Hold drive axle, then press triple roller joint off drive axle.
Make sure rollers are free when pressing off.
-
Remove triple roller joint with rollers and place on a clean surface.
-
Pull joint body off drive axle.
-
Pull boot off drive axle.
-
Clean drive axle, joint body and groove for oil seal.
Triple roller joint, assembling
-
Push joint boot onto drive axle.
-
Slide joint body onto drive axle.
Installing triple roller spider
Chamfer on star faces toward shaft and is used as an assembly aid.