A4 Sedan V6-3.2L (BKH) (2007)
Constant Velocity Joint: Removal and Replacement
Outer CV Joint, 108 mm Diameter, Replacing
Outer CV Joint, 108 mm Diameter, Replacing
Disassembling outer CV joint
-
Drive axle, clamping in vise
Use protective vise covers for this.
-
Open clamps.
-
Slide back protective boot
-
Using a hammer, hit a copper or brass mandrel onto inner ring of CV joint.
-
Remove joint
Outer CV joint, installing
-
Slide joint protective boot onto drive axle.
-
Insert new circlip
Circlip (snap ring) must be replaced
-
Apply 80 g joint grease in inside of joint.
-
Before installing joint or triple roller star, splines - A - must be lightly coated with grease used in joint.