A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-2024002.png)
Note:
^
When inserting, make sure that the wide gap - a - on the joint body is aligned with the narrow gap - b - on the hub after swivelling in.
-
Swivel hub into joint body; at the same time the hub must be swiveled out of the cage arrows far enough to allow the balls to fit into the ball
tracks.
-
Swivel in the hub with balls by applying firm pressure on the cage - arrow -.
Checking function of constant velocity joint:
The constant velocity joint has been correctly assembled if the ball hub can be moved by hand back and forth over its entire axial adjustment range.