A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-2027002.png)
-
Lift out cage with hub.
-
Swing segment of hub into rectangular window of cage.
-
Fold hub out from cage.
6 balls for each joint belong to a tolerance group. Check stub axle, hub, cage and balls for small depressions (pitting build-up) and chafing. Excessive
circumferential backlash in joint makes itself noticed via tip-in shock, in such cases joint should be replaced. Flattening and running marks of balls are
no reason to replace joint.
Installing
-
Insert cage with hub into joint body.
-
Press in opposing balls in sequence, during this, previous position of ball hub to ball cage and to joint body must be re-established.