A4 Sedan V6-3.2L (BKH) (2007)
Differential: Overhaul
Pinion Shaft Adjusting
Pinion Shaft Adjusting
Repairs after which the pinion shaft must be adjusted. Refer to => [ Adjustment Table ] See: Adjustment Table.
Special tools, testers and auxiliary items required
‹› Removal tool (VW 296)
‹› Holding plate (VW 309)
‹› Transmission support (VW 353)
‹› Universal measuring tool (VW 385)
‹› Dial gauge holder (VW 387)
‹› Thrust plate (VW 402)
‹› Press tool (VW 407)
‹› Thrust disc (VW 412)
‹› Assembly tool (VW 792)
‹› Thrust plate (2050)
‹› Thrust pad (3062)
‹› Press support-R&I wheel brg's. (3144)
‹› Press tool (3345)
‹› Torque wrench (VAG 1331)
‹› Dial gauge
‹› Dial gauge extension, 30 mm
Determining total shim thickness "Stotal " for shims "S3" plus "S 4"
(Setting preload of tapered roller bearings for pinion shaft)
‹› Differential removed.
-
Press tapered roller bearing outer race for pinion shaft into transmission housing without shims.