A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-2091008.png)
‹› Make sure plate contact surface fits exactly and is free of oil.
-
Remove master gauge and insert measuring tool into housing.
‹› The dial gauge faces toward final drive cover
-
Install cover for final drive and tighten 4 bolts to 20 Nm.
-
Using adjustable ring, pull 2nd centering pad ( VW 385/36) out as far as possible so that the measuring tool can still just be turned by hand.
-
Turn measuring tool until dial gauge point touches the end measuring plate on pinion shaft head, then measure maximum deflection (return point).