A4 Sedan V6-3.2L (BKH) (2007)
/Page-2085006.png)
-
Pry out flange shaft oil seal - arrow - using an assembly lever.
Installing flange shaft oil seal (right side)
-
Lightly oil outer circumference of new seal.
-
Drive in new flange shaft oil seal using driver ( 2062); keep seal straight when installing.
‹› Insertion depth: 5.50 ± 0.15 mm below top of cover.
‹› Pack space between sealing lip and dust lip half full with sealing grease (G 052 128 A1).
