A4 Sedan V6-3.2L (BKH) (2007)
/Page-2104005.png)
‹› Installation position: groove - arrow - on pin - 3 - faces toward selector shaft cover.
-
Clean threads of locking bolts - 1 - with a wire brush. Then insert bolts with locking fluid (AMV 185 101 A1 ) and tighten to 45 Nm.
-
Install cover - A - with new O-ring.
-
Clean threads of bolts - arrows - with a wire brush. Then insert bolts with locking fluid (AMV 185 101 A1 ) and tighten to 24 Nm.
‹› Use mounting sleeve (01E 311 120) - item A - to prevent damaging the seal - C - when installing.