A4 Sedan V6-3.2L (BKH) (2007)
Window Track: Service and Repair
Window Shaft Strips
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Using Trim Removal Wedge (3409) - 1 -, press upper edge of rubber strip - 2 - down until it slides over upper edge of window shaft strip - 3 -.
-
Pull Trim Removal Wedge (3409) along strip - arrow - in this position.
-
Remove strip.
Installing
‹› Only use Cleaning Solution (D 009 401 04 ) as an installation aid.
‹› If other lubricants are used, the trim may fall off due to vibrations.
-
Engage at top and lightly press down - rail slides over rubber
-
Engage top of trim - 3 -.
-
With flat hand, press trim down until rubber - 5 - slides over lower edge - 4 -.
-
Pull with hand in this position over complete trim.