audi Workshop Repair Guides

Audi A5 Service and Repair Manuals

ABOUT US
Checking heat output of air conditioner and actuation of temperature flaps > < Servicing refrigerant circuit

Removing and Installing Air Conditioner Compressor: Step-by-Step Guide

Removing and installing drive plate with rolling bearing
Removing and installing drive plate with rolling bearing
–  Detach the drive plate from the compressor shaft → Chapter.
   
–  Remove the circlip -A-.
–  Detach the drive plate -B-.
  Note
t  Replace the circlip -A-.
t  Clean the air conditioner compressor flange before attaching the drive plate.
t  On fitting the circlip -A-, take care not to bend it open more than necessary.
t  Ensure correct insertion of the circlip -A-. The bevelled side -C- faces away from the air conditioner compressor (flat side faces compressor).
  A87-0627

Checking heat output of air conditioner and actuation of temperature flaps > < Servicing refrigerant circuit