–
| Lift out ATF filter -2-. |
Installation is carried out in reverse sequence; note the following: |
Note Check ATF filter for cracks and renew if necessary. |
–
| First insert ATF filter -2- into gearbox by hand as far as stop, then secure with bolts. |
Caution Risk of damage to gearbox |
t
| All plugs inserted in ATF lines and gearbox when dismantling must be removed. |
t
| If you forget to remove the plugs, the ATF cooling will be ineffective and the gearbox will be damaged. |
|
–
| Check ATF level and top up as required → Chapter. |
|
|
|