audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Identification of rear final drive units 0BF and 0BE > < Renewing oil seals for flange shafts

A5

  • Power transmission
  • Rear final drive 0BF and 0BE - sport differential
  • Technical data
  • Code letters, allocation, transmission ratios, capacities

Audi A4 2008 ► - Code letters, allocation, transmission ratios, capacities
Audi A4 2008 ► - Code letters, allocation, transmission ratios, capacities
The following data can be found in the → Electronic parts catalogue.
t  Date of manufacture
t  Allocation to engine and manual or automatic gearbox according to code letters and PR numbers
   
Rear final drive 0BF
Code letters LFULFVLFW
Ratio Final drive
Z2 : Z1		35 : 9 = 3.88937 : 9 = 4.11143 : 13 = 3.308
Drive shaft flange Ø 75.5 mm75.5 mm75.5 mm
Gear oil capacity
t  For final drive (differential and pinion shaft)
t  No change required
0.95 ltr.
Gear oil specification → Electronic parts catalogue
ATF capacity
t  For hydraulic control unit and superposition gears
t  No change required
approx. 0.85 litres
ATF specification → Electronic parts catalogue

   
Rear final drive 0BF
Code letters LGHLGJMBV
Ratio Final drive
Z2 : Z1		37 : 10 = 3.70035 : 8 = 4.37535 : 9 = 3.889
Drive shaft flange Ø 75.5 mm75.5 mm75.5 mm
Gear oil capacity
t  For final drive (differential and pinion shaft)
t  No change required
0.95 ltr.
Gear oil specification → Electronic parts catalogue
ATF capacity
t  For hydraulic control unit and superposition gears
t  No change required
approx. 0.85 litres
ATF specification → Electronic parts catalogue

   
Rear final drive 0BF
Code letters MBWMKUMKV
Ratio Final drive
Z2 : Z1		37 : 10 = 3.70037 : 9 = 4.11143 : 13 = 3.308
Drive shaft flange Ø 75.5 mm75.5 mm75.5 mm
Gear oil capacity
t  For final drive (differential and pinion shaft)
t  No change required
0.95 ltr.
Gear oil specification → Electronic parts catalogue
ATF capacity
t  For hydraulic control unit and superposition gears
t  No change required
approx. 0.85 litres
ATF specification → Electronic parts catalogue

   
Rear final drive 0BF
Code letters MKWMKXMKY
Ratio Final drive
Z2 : Z1		35 : 8 = 4.37535 : 9 = 3.88937 : 10 = 3.700
Drive shaft flange Ø 75.5 mm75.5 mm75.5 mm
Gear oil capacity
t  For final drive (differential and pinion shaft)
t  No change required
0.95 ltr.
Gear oil specification → Electronic parts catalogue
ATF capacity
t  For hydraulic control unit and superposition gears
t  No change required
approx. 0.85 litres
ATF specification → Electronic parts catalogue

   

  • Power transmission
  • Rear final drive 0BF and 0BE - sport differential
  • Technical data
  • Code letters, allocation, transmission ratios, capacities

Identification of rear final drive units 0BF and 0BE > < Renewing oil seals for flange shafts