audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing camshaft control valve 1N205 and exhaust camshaft control valve 1N318 > < Timing chain covers, camshaft control valves

A5

Timing chain covers, camshaft control valves - exploded view
   
Timing chain covers, camshaft control valves - exploded view
1 - O-ring
q   Renew
q   Lubricate before installing
2 - Guide tube for oil dipstick
3 - Bolt
q   9 Nm
4 - Bolt
q   9 Nm
5 - Exhaust camshaft control valve 1 -N318-
6 - Seal
q   Lubricate before installing
q   Renew if damaged
7 - Camshaft control valve 1 -N205-
q   Removing and installing → Chapter
8 - Oil seal
q   Lubricate before installing
q   Renew if damaged
9 - Bolt
q   Tightening sequence → Fig.
10 - Timing chain cover (top)
q   Removing and installing → Fig.
11 - Gasket
q   Renew if damaged
12 - O-ring
q   Renew
q   Lubricate before installing
13 - Dowel pins
q   For centring cover
14 - Timing chain cover (bottom)
q   Renewing → Chapter
15 - Bolt
q   Renew
q   Tightening sequence → Fig.
16 - Oil seal
q   For vibration damper
q   Renewing → Chapter
17 - Sealing plug
q   Renew

   
Timing chain cover (top) - tightening sequence
–  Tighten bolts -1 to 6- in the sequence shown:
1.  Tighten bolts to 9 Nm.
  A15-11235
Timing chain cover (bottom), tightening sequence
–  Tighten bolts -1 to 8- in two stages in the sequence shown:
–  1. Tighten bolts to 4 Nm.
–  2. Turn bolts 45° further.
  A15-11234

Removing and installing camshaft control valve 1N205 and exhaust camshaft control valve 1N318 > < Timing chain covers, camshaft control valves