–
| Lift charge air cooler off radiator -arrows A- and press in direction of -arrow B-. |
–
| Pull left side of charge air cooler downwards -arrow C- and detach charge air cooler. |
Installation is carried out in the reverse order; note the following: |
Note If there are slight impressions on the fins, refer to → Chapter. |
Note t
| Hose connections and hoses for charge air system must be free of oil and grease before assembly. |
t
| To ensure that the charge air hoses can be properly secured at their connections, spray rust remover onto the worm thread of used hose clips before installing. |
|
|
|