A5
| Assembly mountings - exploded view |
| 1 - | Retainer |
| q | For electrical connector |
| 2 - | Bolt |
| q | 20 Nm |
| 3 - | Bracket |
| q | For engine mounting |
| q | Renew bracket if engine mounting is defective |
| q | Check bracket on opposite side; renew if necessary |
| 4 - | Retainer |
| q | For hydraulic line |
| 5 - | Nut |
| q | 9 Nm |
| 6 - | Bolt |
| q | 40 Nm |
| 7 - | Engine support |
| q | Version fitted in vehicle may differ from illustration |
| 8 - | Bolt |
| q | 10 Nm |
| 9 - | Heat shield |
| q | Version fitted in vehicle may differ from illustration |
| 10 - | Bolt |
| q | Renew |
| q | 90 Nm + turn 90° further |
| 11 - | Engine mounting |
| q | With left electrohydraulic engine mounting solenoid valve -N144- (left-side only) |
| q | Renew in pairs |
| q | Removing and installing → Chapter |
| 12 - | Subframe |
| 13 - | Bolt |
| q | 55 Nm |
|
|
