audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing engine oil cooler > < Engine oil cooler, pressure control valve, oil filter housing and oil pressure switch
Engine oil cooler, pressure control valve, oil filter housing and oil pressure switch - exploded view
   
Engine oil cooler, pressure control valve, oil filter housing and oil pressure switch - exploded view
1 - Mounting plate
q   For engine oil cooler, pressure control valve for crankcase breather system, oil filter housing
q   Removing and installing → Chapter
2 - Bolt
q   9 Nm
3 - Seal
q   Renew
4 - Oil pressure switch
q   Engine codes CAMA, CAMB, CAPA: oil pressure switch -F1-; engine codes CCLA, CCWA, CCWB, CGKA, CGKB: oil pressure switch for reduced oil pressure -F378-
q   Opening/closing pressure 0.75 ... 1.05 bar
q   Grey insulation
q   Checking in „Guided Fault Finding“ → Vehicle diagnostic tester
q   Removing and installing oil pressure switch -F1- - engine code CAPA → Chapter
q   Removing and installing oil pressure switch -F1-/oil pressure switch for reduced oil pressure -F378- - engine codes CAMA, CAMB, CCLA, CCWA, CCWB, CGKA, CGKB → Chapter
q   20 Nm
5 - O-rings
q   Renew
6 - Seal
q   Renew
7 - O-ring
q   Renew
8 - Bolt
q   9 Nm
9 - Oil supply line
q   To turbocharger
10 - O-ring
q   Renew
11 - Oil filter element
q   Removing and installing → Booklet811, → Booklet812 or → Booklet818
12 - Seal
q   Renew
13 - Sealing cap
q   35 Nm
14 - Bolt
q   9 Nm
15 - Retaining clip
q   For oil filter housing
16 - Oil filter housing
q   Removing and installing → Chapter
q   With oil filter bypass valve, 2.0 … 3.0 bar (pressure differential upstream/downstream of filter)
17 - Pressure control valve for crankcase breather system
q   Removing and installing → Chapter
18 - Bolt
q   9 Nm
19 - Crankcase breather pipe
20 - O-ring
q   Renew
21 - O-ring
q   Renew
22 - Engine oil cooler
q   See note → Chapter
q   Removing and installing → Chapter
q   With oil cooler bypass valve, 2.0 … 3.0 bar (pressure differential upstream/downstream of engine oil cooler)
23 - Bolt
q   9 Nm
24 - Gaskets
q   Renew
25 - Coolant hose
26 - Coolant pipe (top)
27 - O-ring
q   Renew
28 - Nut
q   9 Nm
29 - Gasket
q   Renew

   

Removing and installing engine oil cooler > < Engine oil cooler, pressure control valve, oil filter housing and oil pressure switch