A5
| Radiator, radiator cowl and radiator fans - exploded view |
| Radiator and radiator fans |
| 1 - | Retaining clip |
| 2 - | Radiator outlet coolant temperature sender -G83- |
| q | Removing and installing → Chapter |
| 3 - | Air duct |
| 4 - | Coolant hose |
| q | Lift retaining clip to detach |
| q | Connecting → Fig. |
| 5 - | O-ring |
| q | Renew |
| 6 - | Radiator |
| q | Removing and installing → Chapter |
| q | If renewed, change coolant in entire system |
| 7 - | Coolant hose |
| q | Lift retaining clip to detach |
| q | Connecting → Fig. |
| 8 - | O-ring |
| q | Renew |
| 9 - | Coolant pipe |
| q | To coolant expansion tank |
| q | Press release ring to detach |
| q | Connecting → Fig. |
| 10 - | O-ring |
| q | Renew |
| 11 - | Rubber bush |
| q | For radiator |
| 12 - | Retaining pin |
| q | Use screwdriver to release and pull off |
| 13 - | Air duct |
| 14 - | Condenser |
| q | Removing and installing → Rep. gr.87 |
| 15 - | Air duct |
| 16 - | Rubber bush |
| q | For radiator |
| 17 - | Radiator bracket |
| 18 - | Bolt |
| q | 5 Nm |
| 19 - | Washer |
| 20 - | Bolt |
| q | 4.5 Nm |
| 21 - | O-ring |
| q | Renew |
| 22 - | Coolant hose |
| q | Lift retaining clip to detach |
| q | Connecting to radiator → Fig. |
| 23 - | O-ring |
| q | Renew |
| Radiator cowl and radiator fans |
| 1 - | Radiator fan -V7- |
| q | With radiator fan control unit -J293- |
| q | Removing and installing → Chapter |
| 2 - | Radiator fan 2 -V177- |
| q | With radiator fan control unit 2 -J671- |
| q | Removing and installing → Chapter |
| 3 - | Radiator cowl |
| q | Removing and installing → Chapter |
| 4 - | Bolt |
| q | 3.5 Nm |
| 5 - | Fan wheel |
| q | Pin must engage in hole |
| 6 - | Bolt |
| q | 5 Nm |
| 7 - | Fan wheel |
| q | Pin must engage in hole |
| 8 - | Bolt |
| q | 5 Nm |
| 9 - | Bolt |
| q | 3.5 Nm |
