Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing sump (bottom section) >
< Sump (bottom section) and oil pump - exploded view
A5
Power unit
6-cylinder TDI engine (3.0 ltr. 4-valve common rail - generation II), mechanics
Engine lubrication / Sump (bottom section) and oil pump
Removing and installing oil level and oil temperature senderG266
Removing and installing oil level and oil temperature senderG266
Removing and installing oil level and oil temperature sender -G266-
Removing
l
Engine oil drained
→ Booklet811
,
→ Booklet812
or
→ Booklet818
.
–
Unplug electrical connector
-3-
.
–
Remove bolts
-1-
and detach oil level and oil temperature sender -G266-
-item 4-
.
Installing
Installation is carried out in the reverse order; note the following:
l
Tightening torque
→ Chapter „Sump (bottom section) and oil pump - exploded view“
Note
Renew seal
-2-
.
–
Fill up with engine oil and check oil level
→ Booklet811
,
→ Booklet812
or
→ Booklet818
.
Power unit
6-cylinder TDI engine (3.0 ltr. 4-valve common rail - generation II), mechanics
Engine lubrication / Sump (bottom section) and oil pump
Removing and installing oil level and oil temperature senderG266
Removing and installing sump (bottom section) >
< Sump (bottom section) and oil pump - exploded view