audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exhaust system > < Cooling system

A5

Coolant pipes - exploded view
   
Coolant pipes - exploded view
1 - Drain plug
q   10 Nm
2 - Seal
q   Renew
3 - Coolant pipe (front)
q   Removing and installing → Chapter
4 - Bolt
q   9 Nm
5 - Seal
q   Renew
6 - Coolant pipe (bottom left)
q   Removing and installing → Chapter
7 - Bolt
q   9 Nm
8 - O-ring
q   Renew
9 - Coolant connection
q   Removing and installing → Chapter
10 - Coolant pipe (right-side)
q   Removing and installing → Chapter
11 - Bolt
q   9 Nm
12 - Bolt
q   9 Nm
13 - O-ring
q   Renew
14 - Coolant hose
15 - Coolant pipe (rear)
q   Removing and installing → Chapter
16 - Coolant temperature sender -G62-
q   Removing and installing → Chapter
17 - O-ring
q   Renew
18 - Retaining clip
19 - Bolt
q   9 Nm
20 - O-ring
q   Renew
21 - Coolant hose
22 - Bolt
q   9 Nm
23 - Nut
q   9 Nm
24 - Bolts
q   9 Nm
25 - Coolant pipe (top left)
q   Removing and installing → Chapter
26 - Bolt
q   9 Nm
27 - O-ring
q   Renew
28 - Bolt
q   9 Nm

   
Connecting coolant hose with plug-in connector to coolant pipe
–  Remove old O-ring -2- from coolant hose -3-.
–  Lightly lubricate new O-ring with coolant and fit O-ring in coolant hose.
–  Press coolant hose onto coolant pipe -1- until it engages with a click.
–  Press coolant hose in again and then pull to check that plug-in connector is correctly engaged.
  A19-10572

Exhaust system > < Cooling system