audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exhaust system > < Radiator and radiator fans

A5

Removing and installing coolant temperature senderG62
Removing and installing coolant temperature sender -G62-
   
Removing
l  Engine cold.
–  Remove engine cover panel -arrows-.
–  Open filler cap on coolant expansion tank briefly to dissipate residual pressure in cooling system.
  A10-11257
–  Unplug electrical connector -2- at coolant temperature sender -G62-.
  Note
Place a cloth underneath to catch escaping coolant.
–  Unscrew bolt -1- and detach coolant temperature sender -G62-.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Coolant pipes - exploded view“
  Note
t  Fit new O-ring.
t  Insert new coolant temperature sender -G62- immediately into connection to avoid loss of coolant.
–  Check coolant level → Anchor.
  A19-10878

Exhaust system > < Radiator and radiator fans