audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing sump (bottom section) > < Oil pump and sump (bottom section) - exploded view

A5

Removing and installing oil level and oil temperature senderG266
Removing and installing oil level and oil temperature sender -G266-
   
Removing
l  Engine oil drained → Booklet811.
–  Unplug electrical connector -3-.
–  Remove nuts -1- and detach oil level and oil temperature sender -G266--item 4-.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Oil pump and sump (bottom section) - exploded view“
  Note
Renew seal -2-.
–  Fill with engine oil and check oil level → Booklet811.
  A17-0371

Removing and installing sump (bottom section) > < Oil pump and sump (bottom section) - exploded view