A5
| Air cleaner - exploded view |
| 1 - | Air duct |
| 2 - | Threaded pin |
| q | 9 Nm |
| 3 - | Nut |
| q | 9 Nm |
| 4 - | Rubber grommets |
| q | Inserted in bracket for air cleaner |
| 5 - | Bracket |
| q | For air cleaner |
| 6 - | Bolt |
| q | 2.5 Nm |
| 7 - | Heat shield |
| 8 - | Speed nut |
| 9 - | Bolt |
| q | 3.5 Nm |
| 10 - | Air cleaner (top section) |
| q | Clean out salt deposits, dirt and leaves, etc. |
| 11 - | Air hose |
| q | Clean out salt deposits, dirt and leaves, etc. |
| 12 - | Hose clip |
| q | Spray rust remover onto worm thread before installing |
| q | 3.5 Nm |
| 13 - | Air filter element |
| q | Use genuine air filter element → Electronic parts catalogue |
| q | Removing and installing → Chapter |
| q | Maintenance intervals → Maintenance tables |
| 14 - | Bolt |
| q | 9 Nm |
| 15 - | Spacer sleeve |
| 16 - | Rubber grommet |
| 17 - | Air cleaner (bottom section) |
| q | Clean out salt deposits, dirt and leaves, etc. |
| q | Removing and installing → Chapter „Removing and installing air cleaner housing“ |
| 18 - | Grommet |
| q | For water drain |
| 19 - | Water drain |
| q | Clean |
| 20 - | Air duct |
| 21 - | Bolt |
| q | 2 Nm |
