audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing horns H2/H7 - Audi RS?5 > < Exploded view of horns
Removing and installing horns H2/H7 - Audi A5
Removing and installing horns -H2-/-H7- - Audi A5
   
Removing
–  Switch off ignition and take out ignition key.
–  Remove air intake grille → Rep. gr.63.
–  Remove nut -2-.
–  Remove horn -3- from bracket.
–  Unplug electrical connector -1-.
  Note
If the horn cannot be removed as described owing to the specification of the vehicle, the relevant wheel housing liner (front) must be removed. Removing front wheel housing liner → Rep. gr.66.
Installing
l  Tightening torque → Chapter
Installation is carried out in the reverse order; note the following:
–  Install air intake grille → Rep. gr.63.
  A90-10040

Removing and installing horns H2/H7 - Audi RS?5 > < Exploded view of horns