audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing warning lamp for airbag deactivated on front passenger sideK145 > < Removing and installing headlight range control regulatorE102

A5

Removing and installing hazard warning lights buttonE229
Removing and installing hazard warning lights button -E229-
Special tools and workshop equipment required
   
t  Removal wedge -3409-
t 
  W00-0016
Removing
–  Switch off ignition and take out ignition key.
–  Use removal wedge -3409- to lever off cover -1- for MMI screen at corners -arrow- and detach.
–  Unplug electrical connector and detach mounting frame.
  A70-10671
–  Press hazard warning lights button -E229--item 1- out of mounting frame -2--arrow-.
Installing
Installation is carried out in the reverse order; note the following:
–  Press cover for MMI screen onto mounting points until fasteners engage fully.
  A96-10440

Removing and installing warning lamp for airbag deactivated on front passenger sideK145 > < Removing and installing headlight range control regulatorE102