audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing door opener illumination bulb L108/L109 > < Removing and installing driver seat memory operating unitE97

A5

Removing and installing rear lid remote release switchE188
Removing and installing rear lid remote release switch -E188-
   
Removing
–  Switch off ignition and take out ignition key.
–  Remove door trim (front) → Rep. gr.70.
–  Unplug electrical connector -3- at rear lid remote release switch.
–  Release retaining clip -1- and press trim panel -2- with rear lid remote release switch out of door trim -arrow-.
  A96-10449
–  Carefully release retaining hooks -arrows- using a small screwdriver.
–  Take rear lid remote release switch -item 1- out of trim panel -2- towards rear.
Installing
Installation is carried out in the reverse order; note the following:
–  Press trim panel -2- with rear lid remote release switch into mounting until retaining hooks engage.
–  Install door trim (front) → Rep. gr.70.
  A96-10450

Removing and installing door opener illumination bulb L108/L109 > < Removing and installing driver seat memory operating unitE97