audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Lights and switches in roof trim > < Lights and switches in centre console

A5

Removing and installing window regulator switches E52/E54
Removing and installing window regulator switches -E52-/-E54-
   
Removing
–  Switch off ignition and take out ignition key.
–  Insert screwdriver in hole at bottom of trim -1-.
–  Starting at rear, carefully prise trim off door trim -arrow-.
  A70-10917
–  Carefully release retaining hooks -arrows- using a small screwdriver.
–  Press window regulator switch -2- out of switch mounting -1-.
–  Unplug electrical connector -3-.
Installing
Installation is carried out in the reverse order; note the following:
–  Press window regulator switch into switch mounting until retaining hooks engage.
–  Fit trim for armrest → Rep. gr.70.
  A96-10531

Lights and switches in roof trim > < Lights and switches in centre console