A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) (2011)
/l4-2.0l_turbo_(caeb)/Page-776003.png)
-
Drill out the original joint using the spot weld breaker (V.A.G 1731).
-
Separate the joint with a flat chisel (VAS 5300/34), if necessary.
-
Remove any remaining material with the straight sander (VAS 5170).
Replacement part
‹› Bumper mount
Installation
-
Install new part with vehicle standing on the alignment bracket set and affix it in place.
-
Check fit with attachments.
