A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-1347006.png)
-
Engage clutch master cylinder in mounting bracket release tool (3355).
Rotate tool counter-clockwise - arrow B - while pulling master cylinder forward - arrow -.
-
Slide pins - 4 - in clutch pedal to clutch master cylinder in and press them in until they are flush.
Make sure pins are in correct location. The groove on pin - B - must align with groove in pedal arm.
-
Install over-center spring - 2 - on the clutch pedal.
