A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-3178002.png)
Installing
‹› Tightening specification, refer to => [ Inner Tail Lamp Assembly Overview ] See: Inner Tail Lamp Assembly Overview.
Install in reverse order of removal, observing the following:
-
Insert the new bulb in the socket without touching the bulb with bare hands.
-
Slide the large clamping bracket - 3 - onto the inner tail lamp threaded pins. The guide pins - 2 - and - 6 - must engage in the mounts.
-
Tighten the nuts - 1 -.
‹› When tightening the nuts, the clamping bracket wedges itself onto the rear lid - arrows -.
‹› Ignore items - 4 and 5 -.
