A6 V6-3.0L (AVK) (2004)
Relay Box: Service and Repair
8-Pin Relay Carrier, Removing and Installing
8-Pin Relay Carrier, Removing and Installing
8-pin relay carrier is located below the driver-side storage compartment.
Removing
-
Remove driver-side storage compartment.
-
Remove nut -A- and sheet metal screw -B-.
-
Remove relay and control modules, unclip relay adapter and if necessary, unclip secondary relay carrier.
-
Remove 8-pin relay carrier from bracket.
Installing
Installation is the reverse of removal.
Tightening torque
Component
Nm
8-pin relay carrier to bracket
2
NOTE:
Always check the exact assignment of 8-pin relay carrier in the current wiring diagram.