A6 V6-3.0L (AVK) (2004)
/Page-3753001.png)
Seals and Gaskets: Service and Repair
O-Ring For Output Flange/Drive Shaft, Replacing
5 SPD. A/T 01L AWD
O-ring for output flange/drive shaft, replacing
Special tools and equipment
^
VAG 1306 Drip tray
^
3402 Right sealing ring installer
Removing
^
Disconnect left and right three way catalytic converters from rear exhaust system and press both three way catalytic converters apart at rear.
^
If necessary, remove rear part of exhaust system.
^
Remove heat shield for drive shaft.
^
Disconnect drive shaft from transmission flange
^
Place VAG 1306 drip tray underneath transfer case.
^
Drain transmission fluid from transfer case
^
Unbolt output flange by securing output flange against turning using a drift.
