A6 Quattro Sedan V6-2.8L (AHA) (1998)
8. Left stop bolt, 40 Nm
9. Detent segment
10. Torx bolt, 25 Nm
11. Spring pin
12. 5th and reverse gear selector fork
^
Installation position see Fig. 1
13. Selector rod for 1st and 2nd gear as well as for 5th and reverse gear
14. Ball sleeve
^
Removing and installing see Fig. 2
15. Selector fork for 1st and 2nd gear
16. Coupling plate
^
Installation position see Fig. 1
17. Bush
^
Removing see Fig. 3
^
Installing see Fig. 4
18. Ball sleeve
^
Lever off the selector rod with a screwdriver
^
Press onto the selector rod
19. Selector rod for 3rd and 4th gear
20. Selector fork for 3rd and 4th gear
21. Spring pin
22. Cover
^
For selector shaft
23. Torx bolt, 20 Nm
24. Selector shaft
25. Oil seal
^
Lever out with screwdriver
^
Installation position see Fig. 5
Fig. 1 Installation position of 5th and reverse gear selector fork and coupling plate for selector rod
^
Distance -a- = 55 mm
^
Distance -b- = 60 mm
Fig. 2 Removing and installing ball sleeve