A6 Quattro Sedan V6-3.0L (AVK) (2002)
B - If airbag control module is replaced:
-
Check DTC Memory:
A triggered belt tensioner can be recognized by the DTC: "Ignitor for belt tensioner - resistance is too high"
-
If necessary (visual check) also replace the following: all damaged components
Accident where airbag didn't deploy
-
If airbag Malfunction Indicator Lamp (MIL) -K75- does not indicate a malfunction, then airbag components do not need to be replaced. Check
seatbelts separately.
After replacing airbag units or the control module, attach label (only tear-off strip) to registration card and mail in.
Storing and transporting airbag units
The airbag unit is a pyrotechnical object of class PT 1. These units must be stored and transported according to laws regarding explosive and dangerous
materials (explosive substance regulations).
For Germany: Small quantities of materials and objects may be stored in locked rooms without a storage permit. Shipping and transportation must only
take place in officially accepted transport containers.
-
Airbag units must not be stored for longer than 3 months.
Disposal of airbag units
-
In Germany, airbag units must be made unusable via electric ignition according to accident prevention regulations, because pyrotechnic objects
can lead to injuries if activated inappropriately (e.g. when disposing using a cutting torch).
-
Electric ignition of airbag unit must always occur with airbag unit installed in a vehicle. Observe ignition regulation ET- No. 8D1 971 259.
-
Minimum distance from vehicle: 10m.