A6 Quattro Sedan V6-3.2L (BKH) (2005)
/Page-4220002.png)
-
Installation is in reverse order of removal.
When installing ESP Sensor Unit G419 make sure it is correctly seated in its mounting and is free of stress.
Do not use securing bolts to forcibly position ESP Sensor Unit G419.
-
Tighten bolts to 10 Nm.
-
If control module is replaced, select "Replace" function for respective control module in "Guided Fault Finding".
For this, use Vehicle diagnostic, test and information system VAS 5051.
