A6 Quattro Sedan V6-3.2L (BKH) (2005)
Wiring Harness: Service and Repair
Special Signal System, Siren, Coding Connector, A6
Special Signal System, Siren, Coding Connector, A6
‹› The brown coding connector is attached to the wiring harness by a cable tie.
‹› After inserting the brown coding connector into the connector, the loudness of the special signal siren is reduced to 50 dB.
Procedure
-
Remove the luggage compartment side trim cover.
-
Disconnect the connector - 3 -.
‹› Ignore - 1, 2, 4 and 5 - and - arrows -.
-
Connect the brown coding connector - 2 - for the siren into the free connector - 1 -.