A6 Quattro Sedan V6-3.2L (BKH) (2005)
/Page-193002.png)
-
Loosen nuts - 2 - and - 4 - (5 Nm) and screw - 1 - (5 Nm) on Infotainment rack - 3 -.
-
Disconnect all faulty connectors on the rack control modules.
-
Tip rack into luggage compartment until all Navigation System with CD Drive Control Module J401 connectors can be reached.
-
Disconnect optical MOST bus connector.
-
Fit the Protective Cap For Cable Connector VAS 6223/9 - 1 - on to the MOST-Bus connector - 2 -.
-
Disconnect remaining connectors.
-
Insert two clips of Radio Release Tool T10057 into release slots of Navigation System with CD Drive Control Module J401 until they engage.
Points on the grip eyelets of tool face outward.
-
Remove Navigation System with CD Drive Control Module J401 from rack.
-
Remove Radio Release Tool T10057 by pressing locking tabs on Navigation System with CD Drive Control Module J401.
Installing
-
Connect harness connectors.
-
Slide Navigation System with CD Drive Control Module J401 in until it engages in mounting frame.
