A6 Quattro Sedan V6-3.2L (BKH) (2005)
-
Remove E-Box cover in left plenum chamber.
-
Remove bolts - arrows - and remove wiper frame completely.
-
Disconnect electrical connector - 1 -.
Installing
Install in reverse order of removal, noting the following:
-
Install wiper motor with wiper frame in vehicle, observe the following tightening sequence to do so:
-
Hand-tighten center bolt.
-
Tighten outer bolts, then tighten center bolt at wiper frame.
Install in reverse order of removal, observing the following:
-
Adjust wiper arms. Refer to => [ Windshield Wiper Arms, Adjusting ] See: Wiper and Washer Systems/Wiper Arm/Adjustments/Windshield
Wiper Arms, Adjusting.
Tightening Specifications