A6 Quattro Sedan V6-3.2L (BKH) (2005)
Repairs and Inspections Required After a Collision: Service and Repair
Checking Mounting Components After an Accident
Checking Mounting Components After An Accident
It is essential to always replace all damaged mounting components - it is not permissible to "reshape" or rework damaged components.
Following components must be checked after every airbag deployment.
If front passenger airbag has been deployed:
-
Instrument panel central tube, passenger airbag supports and passenger airbag module must be installed free of tension. Replace central tube.
-
Check glove compartment for damage. Replace glove compartment if damaged.
If driver airbag has been deployed:
-
Steering wheel: Remove steering wheel and lay with steering wheel rim on a flat surface. The entire steering wheel rim must rest on the surface.
Otherwise, steering wheel should be replaced.
-
Check steering wheel for smoke residue. If smoke residue is present, replace steering wheel.